Seam repair
Seams on metal and rubber roofs are repaired so water stops getting through.
A Lyndhurst roofer can fix leaks on metal, rubber and shingle mobile home roofs, working with the light framing these homes are built on. Dial (551) 348-2859 to talk through the leak with a local roofer.
Leaks on a manufactured home roof tend to follow a predictable pattern. The roof might be metal panels, an EPDM or TPO membrane, or asphalt shingles on a pitched roof, depending on the age and model of the home. Most metal roof leaks come from seams opening up, fasteners loosening and caulk drying out around every penetration.
Water does damage quickly in a manufactured home. The thin materials used in many mobile homes stain, swell and grow mold quickly once they get wet. If a ceiling panel bulges with trapped water, a small hole at the low point lets it drain into a bucket, keeping clear of light fixtures, and power to that area should be shut off at the panel if it is safe to reach.
Climbing on a mobile home roof is riskier than it looks. Stepping between the supports can buckle the metal or damage the ceiling, so roofers stay on the truss lines. Stay off a wet or icy roof, and look for the data plate inside the home, which shows the roof load the home was designed for.
If the problem goes deeper than it first looked, a Lyndhurst roofer may also recommend roof coating or metal roof repair.
Need mobile home roof repair in Lyndhurst? Call (551) 348-2859 to talk to a local roofer.
Call nowHere is how a roofer usually approaches a mobile home roof repair.
The roofer walks the truss lines or works from a ladder, checking seams, fasteners, the perimeter edge and every vent, skylight and curb. Inside, ceiling stains help point to where water is getting in.
Loose or stripped screws are replaced with larger fasteners that have new rubber washers, and loose panels are fastened down so they stop flexing. Rusted spots are cleaned and treated before sealing.
Seams and laps are cleaned, primed where needed and sealed. On rubber roofs, the roofer patches with matching membrane and lap sealant.
Old caulk is removed from vents, skylights and the AC curb, and they are resealed with a sealant compatible with the roof, or replaced if cracked. The perimeter edge where roof meets wall is sealed as well.
A reflective coating over the whole roof ties the repairs together and slows rust. The roof must be clean and dry for the coating to stick.
Seams on metal and rubber roofs are repaired so water stops getting through.
Cracked vent caps are replaced with a sealant that suits the roof.
Loose and rusted screws are replaced with gasketed fasteners before they let water in.
An elastomeric or silicone coating is applied to seal and protect it.
Soft spots are cut out and rebuilt so the roof is solid again.
Mobile home roof replacement makes sense when the metal has rusted through in many places, the membrane is worn out or the decking and trusses have rotted from years of leaks. Older metal roofs are often fastened directly over the trusses with insulation below, so replacement can include adding a deck, more insulation and a new membrane or metal roof. Damaged trusses are fixed first.
In Lyndhurst, mobile home roof replacement plans begin with the data plate and the condition of the trusses. Ask whether a permit is needed, since manufactured homes can have their own rules. The goal is a roof that sheds water and stays quiet in the wind for years.
A mobile home roof over installs a new roof on top of the existing one instead of tearing it off. Roof overs range from low slope membrane systems over foam board to framed pitched roofs topped with shingles or metal. Most roof overs also add insulation, which helps with comfort and with the noise of rain on metal.
For a Lyndhurst mobile home roof over, the roofer checks the walls and trusses, since the new roof adds weight and catches more wind. Pitched roof overs in particular may need engineering and a permit, and they should be anchored to resist wind uplift. Done well, a roof over can stop chronic leaks and add years to the home.
Around Lyndhurst, mobile home roofs include older metal roofs, rubber membrane roofs and newer shingle roofs on pitched manufactured homes. For homes in Lyndhurst and nearby towns like Rutherford, North Arlington, East Rutherford and Wallington, resealing and recoating every several years keeps most metal roofs dry, while older roofs that have leaked for years often need a roof over instead.
For mobile home roof repair in Lyndhurst, NJ or nearby towns like Rutherford, North Arlington, East Rutherford and Wallington, call (551) 348-2859 to reach a roofer who covers your street.
Cold winters bring snow, ice and a long stretch of freezing nights. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Lyndhurst, NJ have the roof checked in the fall and again after the snow melts.
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Local roofers see the same roofs and storm damage across Lyndhurst and nearby towns.
Ask the roofer about the cause, the options and the estimate before work starts.
More questions? Call (551) 348-2859
Liquid-applied roof coatings that seal seams, reflect heat and add years to a roof, after the seams and blisters are repaired.
Learn moreReplacing worn screws and washers, resealing panel laps, treating rust and fixing loose trim on metal roofs, so the panels keep shedding water for years more.
Learn moreRepairs for leaking rubber roofs, from peeling seams to pulled flashing at walls and curbs, after the real leak point is found.
Learn moreStopping water at the pipe boots, flashing, valleys and nail holes where roofs actually leak, before wet decking and insulation turn into rot.
Learn moreLooking for something else?
See all roofing servicesCall (551) 348-2859 for a local roofer in Lyndhurst and nearby towns.