Curb flashing
Wall and curb flashing is resecured or replaced with termination bars and sealant.
Commercial roof repair in Lyndhurst starts with finding where water gets in, often at a seam, a rooftop unit curb or a roof drain, then fixing it properly, while the business stays open. Dial (551) 348-2859 to talk with a local roofer about the leak.
On commercial roofs, the leak is usually at a seam, a flashing or a drain. The usual suspects are curb flashing, pipe boots, pitch pans, drains, seams and coping. Punctures from service work on rooftop units are another common cause, since technicians kneel, drop screws and set panels on the membrane.
The drip inside is rarely directly under the opening. It runs along steel deck flutes, across insulation and down beams before it shows up on a ceiling tile. Roofers combine interior clues, a close roof inspection, probing and moisture readings to find the opening.
Some immediate steps help limit damage. Clear the area, contain the water and keep it away from lights and outlets, turning off power to that area at the panel if it is safe. A sagging, water-filled ceiling can be drained into a bucket through a small hole, keeping clear of light fixtures. Stay off the roof until the weather clears and a roofer can go up safely.
Many commercial roof repair calls in Lyndhurst also turn up a need for commercial roof maintenance or tpo roof repair.
Dealing with this in Lyndhurst, NJ right now? Call (551) 348-2859 to reach a nearby roofing contractor.
Call nowGood repairs fix the source, not just the symptom.
Interior leak locations are noted and matched to the roof. That narrows the search area.
Seams are probed, flashings and curbs checked, drains inspected and penetrations examined in the area above and upslope of the leak. A water test can confirm the source when it is unclear.
A core cut or moisture meter shows how far water has spread through the insulation. Wet insulation is cut out and replaced so it does not stay trapped.
The repair uses material that matches the roof: welded patches on TPO or PVC, primer and seam tape on EPDM, new plies on mod bit or built-up roofs. Caulk alone is a stopgap, not a repair.
The roofer clears drains and checks for ponding near the leak. Ponding problems may need crickets or added drains.
The roofer notes what was found and fixed, with locations on a roof plan. A good repair record helps with planning a future replacement.
Wall and curb flashing is resecured or replaced with termination bars and sealant.
Loose edge metal and coping caps are refastened so the roof edge stays sealed.
Loose drain rings and failed scupper flashing are fixed to prevent ponding.
Lifted laps are repaired with matching material so water cannot enter.
Damaged membrane is covered with new material with welded or adhered patches.
A commercial roof leak repair has two parts: a temporary fix to stop water now and a permanent repair. During bad weather, temporary measures hold until conditions allow a proper repair. The permanent repair follows when the roof is dry, using material that matches the roof.
In Lyndhurst, leaks over sensitive areas like server rooms, kitchens or retail floors deserve top priority. Letting the roofer know which spaces are sensitive helps set priorities. A record of each leak builds a history for the roof.
Repair methods for commercial flat roofs vary by system. The roofer matches materials: welding for thermoplastics, tape for EPDM and plies for asphalt roofs. Incompatible repairs tend to fail quickly.
Many flat roof repairs in Lyndhurst also address ponding. Drainage corrections help repairs last. Long-standing water ages the roof faster.
Warehouses tend to have large metal or membrane roofs with skylights, exhaust fans and long drainage runs. Fasteners, laps, skylights and gutters are the usual trouble spots on metal warehouse roofs. Single-ply warehouse roofs tend to leak at seams and flashings.
In Lyndhurst, warehouse roof repairs often need to protect goods and keep loading docks open. The roofer may cover inventory below the work area and schedule around shipping. Old skylights are a serious fall risk, and roofers guard them during work.
Around Lyndhurst, many commercial leaks show up at rooftop units, drains and seams after heavy rain. Across Lyndhurst and nearby towns like Rutherford, North Arlington, East Rutherford and Wallington, buildings range from older built-up roofs to newer TPO and metal, so keeping drains clear and flashings sound prevents many calls.
Searching for commercial roof repair near me from Lyndhurst or Rutherford, North Arlington, East Rutherford and Wallington? Call (551) 348-2859 to talk to a roofer who works in your part of town.
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. That is why roof repair in Lyndhurst is busiest after a hard winter and before the next one.
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers in Lyndhurst know the roof types and weather wear common in local homes.
Ask the roofer about the cause, the options and the estimate before work starts.
More questions? Call (551) 348-2859
Spring and fall roof checks with a written maintenance log, that help the roof reach its full life.
Learn moreFixing leaks in TPO membrane at seams, curbs, drains and penetrations, without smearing caulk over the problem.
Learn moreRepairs for leaking flat roofs, from punctures and seams to clogged drains and wet insulation, with the patch made from material that bonds to what is there.
Learn moreCoating systems that seal and reflect sun on commercial roofs, built to a measured thickness.
Learn moreLooking for something else?
See all roofing servicesCall (551) 348-2859 to talk to a roofer serving Lyndhurst, NJ.