Flashing
Matching flashing at every edge so the details last as long as the panels.
Metal Roofing
Metal Roof Replacement Lyndhurst, NJ
A roofer in Lyndhurst can replace a metal roof that has rusted through, lost its finish or been riddled with worn screw holes, down to the purlins or deck, so the new roof is set up for decades. Dial (551) 348-2859 to talk with a local roofer about replacing the roof.
The line between repair and replacement on metal is whether the panels are still sound. Widespread rust holes, a worn-out finish and hundreds of stripped fastener holes mean the metal has done its job. Older roofs made from thin, lightly coated steel tend to reach that point first.
Not every metal roof replacement starts with a tear-off. Stripping the old metal exposes the framing, which matters because fasteners in rotten wood will not hold. In a retrofit, new panels go over the old roof on a framing system, avoiding tear-off on large or occupied buildings.
Many metal roof replacements are actually shingle roofs getting metal for the first time. The shingles can come off or, if local code permits and the deck is sound, the metal can go over them. It helps to know what is on the roof now, how old it is and whether it has ever been covered over.
Depending on what the roofer finds, metal roof replacement in Lyndhurst, NJ can go hand in hand with metal roof installation and metal roof repair.
Looking for Lyndhurst metal roof replacement? Call (551) 348-2859 to talk to a local roofer.
Call nowThe process
What happens during a metal reroof
The order of work depends on tear-off or re-cover, but the basics are the same.
Assess the old roof
A full look at the panels, framing and attic shows whether the roof can be re-covered or must come off. It also tells whether the framing needs work first.
Pick the system
The roofer and owner pick the panel profile, metal and color and decide how the old roof will be handled. Switching to standing seam usually means adding solid decking.
Strip the panels
Panels and trim come off section by section and go to a metal recycler. Only as much roof is opened as can be covered the same workday.
Fix the purlins
Framing and sheathing damaged by old leaks are replaced before new metal goes on. New screws in rotten wood would fail within a few seasons.
Panel the roof
The roof is dried in, trimmed and paneled, with new boots and flashing at every penetration. Every edge gets new matching trim.
What is included
A complete metal replacement
Tear-off
The worn roof is stripped down to the framing and taken for recycling.
Deck repair
The base under the roof is made sound for a straight, solid roof.
Retrofit framing
A retrofit re-cover avoids a tear-off on larger buildings.
New panels
The new metal system is fastened to the manufacturer pattern.
Related service
Metal Roof Panel Replacement Lyndhurst, NJ
Panel replacement is the middle ground between a patch and a full metal roof replacement. A new panel has to match the rib profile and lap direction so it seals against the panels around it. Standing seam panels can be replaced too, but it takes more work to unseam and reseam the neighbors.
On a Lyndhurst roof that is otherwise sound, a few new panels can add years of service. Color matching is the main limit, since new paint looks brighter than weathered panels. Too many swaps, and a full reroof is the smarter route.
Related service
Metal Roof Over Shingles Lyndhurst, NJ
Metal over shingles is a common way to switch to metal without stripping the old roof. Many codes allow it over a single layer of shingles, and the metal usually goes on over new underlayment, a slip sheet or wood battens.
The catch is that the decking stays hidden. A roofer in Lyndhurst should check the attic for rot and soft spots before recommending it, and the shingles must lie flat enough for the panels. Two existing layers or any doubts about the deck mean a tear-off.
Local help
Metal Roof Replacement Near Me
Metal roof replacement in Lyndhurst covers old barns and shops as well as homes trading shingles for metal. From Lyndhurst out to neighboring towns such as Rutherford, North Arlington, East Rutherford and Wallington, older metal roofs tend to need full replacement once the coating is gone, and newer houses are adding metal as their shingle roofs wear out, and the right approach depends on what the old roof is hiding.
For metal roof replacement in Lyndhurst, NJ or nearby towns like Rutherford, North Arlington, East Rutherford and Wallington, call (551) 348-2859 to reach a roofer who covers your street.
How the weather here affects roofs around Lyndhurst
Winters here are long and cold, with snow on the roof for weeks at a time and plenty of nights below freezing. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in Lyndhurst, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why fix it now
Drier ceilings
A roof problem fixed early rarely spreads to the decking, the insulation or the ceilings.
Roofers who know Lyndhurst
Roofers in Lyndhurst know the roof types and weather wear common in local homes.
Clear next steps
Ask the roofer about the cause, the options and the estimate before work starts.
Metal Roof Replacement FAQ
Is it a good idea to put metal over shingles?
Local code decides whether metal can go over existing shingles. It saves tear-off and disposal, but it hides the deck, so the attic should be checked for rot and soft spots first. Two layers or any rot means the shingles should come off.
How do I know my metal roof is past repair?
The answer depends on how much of the metal is still sound. Widespread rust-through, failed paint and stripped holes everywhere usually mean new metal. A call to (551) 348-2859 is a good way to find out where the roof stands.
Is old metal roofing recycled?
Metal roofing is one of the most recyclable building materials. Metal can be melted down and reused, so it rarely goes to the landfill. Ask the roofer how disposal is handled before work starts.
Can a new metal roof go over the old metal roof?
A metal re-cover puts a new metal roof on top of the old one, attached through new framing to the structure. The method is popular on commercial buildings and large outbuildings. An engineer or roofer confirms the framing can carry the added load.
How is a single metal roof panel replaced?
Replacing one panel is a routine job on most ribbed and corrugated roofs. The roofer unscrews the panel and its laps, removes it and fastens a matching one in place. Concealed fastener panels are possible but slower to replace.
More questions? Call (551) 348-2859
Often needed together
Metal Roof Installation
Metal roof installation built around the right panel, finish and trim for the house, so the roof handles heat, wind and thermal movement.
Learn moreMetal Roof Repair
Replacing worn screws and washers, resealing panel laps, treating rust and fixing loose trim on metal roofs, so the panels keep shedding water for years more.
Learn moreRoof Replacement
Replacing an aging roof with new underlayment, flashing, vents and roofing, built to current code from the decking out.
Learn moreStanding Seam Metal Roof
Standing seam metal roofing installed, repaired and detailed for thermal movement, with matching trim, closures and snow guards.
Learn more
Looking for something else?
See all roofing servicesTalk to a Lyndhurst roofer about metal roof replacement
Call (551) 348-2859 to talk to a roofer serving Lyndhurst, NJ.